Tag Archives: transport

Size does matter!

This paper machine was measured a few times before being transported.

This paper machine was measured a few times before being transported.

If you want to hear museum people moan, just say “measuring”. Everybody has a story about it. Murphy of Murphy’s Law seems to linger around our tape measures, folding rules and distance meters. Not all stories are as extreme as the story shown in the pictures. The paper machine was measured again and again because it was obvious it was the most difficult thing to move in the great storage relocation. We had a technical documentation. We had specialists in heavy loads for this, experienced in much more problematic cases than our “little” paper machine. We had confidence in our abilities as professionals when we supervised this part of the machine being craned on the low-bed trailer. It was not until then we realized the machine didn’t fit through the gate when standing on the low-bed trailer. It wasn’t much, maybe a few inches. It seemed that the inaccurancies in measurements (height of the machine part, height of the trailer, height of the gate) just added up to the worst case. There was no denying – we had a problem.

On the flat-bed trailer the machine didn't fit through our gate. The riggers had to be creative...

On the flat-bed trailer the machine didn’t fit through our gate. The riggers had to be creative…

Fortunately, we had experienced heavy load riggers. After a few discussions we decided to crane the machine on wheel boards and push it carefully through the gate. It worked. After passing the gate the paper machine was craned back on the low-bed trailer and moved to its new home.

Don't let your eyes fool you: Now it seems obvious that it doesn't fit through the gate, but that's only due to perspective. In reality it were only about 4 cm missing.

Don’t let your eyes fool you: Now it seems obvious that it doesn’t fit through the gate, but that’s only due to perspective. In reality it were only about 4 cm missing.

Other cases in wrong measurements are less spectacular, but the problems caused are sometimes bigger. I don’t know why, but some people tend to round down when it comes to measuring. Not particulary helpful, especially if you have a crate builder or a showcase designer who has the same tendency…

A special problem appears when you work with international partners. In the European Union, measuring in the metric system is common practice, whereas the UK and the USA use their own system (Imperial units and United States customary units, which vary in some cases). You normally keep this in mind as a registrar but misunderstandings are bound to happen anyway. I remember one case when a hardly readable fax with object data reached us. Looking back it sounds weird but for a long time we planned that something will arrive in a small box of approximately 50 x 20 x 21 centimetres (20 x 8 x 8 inches). When the estimated shipping costs were faxed we were shocked by the amount given. It was then that we re-read the fax, realizing that we misinterpreted it. Yeah, the sign behind the measures was NOT a double prime (“) it was just a normal prime (‘). The small sign that seperates the inch (1” = 2.54 cm) from the foot (1′ = 30.48 cm). We were not going to receive a neat little crate, we were going to receive a veritable 20’ container…

Angela

Facebooktwitterredditpinterestlinkedintumblrmail